LT6232IGN#TRPBF Overview

In order to protect the op amps, a SSOP case is used. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. In recent months, the number of terminations has approached 16. The pins on this board total to 16 in total. It is important to remember that this op amp should be operated at a voltage of 5V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. Linear amplifier includes 16 pins. Op amp ic rates 350μV for input offset voltage. The buffer amplifier is capable of operating from a supply current of 3.3mA . Maintain 106.02dB as the voltage gain. Using this buffer op amp requires a temperature of at least -40°C. It is recommended that op amp be used at temperatures below 85°C. A total of 4 elements are present in this linear amplifier. I would like to point out that this electrical component is capable of working from a voltage below 12.6V as far as the power supply is concerned. Keeping the linear amplifier's supply voltage above 3V is recommended. This electrical part should be conducted under the dual supply voltage of 6.3V volts when you conduct this part.

LT6232IGN#TRPBF Features

16 Pins
supply voltage of 5V
106.02dB voltage gain

LT6232IGN#TRPBF Applications

There are a lot of Analog Devices, Inc. LT6232IGN#TRPBF Instrumentational OP Amps applications.

Scintillation detectors
Integrator circuits
Oscilloscopes
Division circuits
Power control
Subtraction operation circuits
Logarithmic operation circuits
Image computer boards
PDA
Instrumentation

In Stock : 3121