AP1084D33G-13 Overview

A Tape & Reel (TR) case is used to deliver the Voltage Regulated IC. In order to package the IC voltage regulator, a TO-252-3, DPak (2 Leads + Tab), SC-63 case is used. There are 2 terminations on the gadget. Output type Fixed. Linear IC consists of 1 battery regulators. IC Regulator is possible to alter the range of the operating temperature of Surface Mount in the device. The Regulator IC chip is set to operate at 0°C~125°C TJ degrees. There is a configuration in this voltage regulator IC that specifies that its output function is Positive. The chip has a total of 4 pins on it, each with its own function. In order to ensure prompt, adequate, and prompt performance, this regulator has 1 outputs in total. There is a 10 volt dropout voltage on this transistor. Several pins on the chip are 3-shaped. I just wanted to let you know that this IC voltage regulator has the part number AP1084 as its basic part number. An example of this type of component would be a Other Regulators component. A packing method for the IC regulator is TAPE AND REEL, which means it is packed in a certain way. It works in 5A output current at most

AP1084D33G-13 Features

1.3V dropout voltage
Other Regulators subtageroy
TAPE AND REEL method of packing

AP1084D33G-13 Applications

There are a lot of Diodes Incorporated AP1084D33G-13 Linear Voltage Regulators applications.

Main inverter
Workstations
Op-amps
Multiple-power supply system
High output current applications
Alternators
ADAS (Advanced Driver-Assistance System)
Analog datalogger
Smartcard
Laboratory

In Stock : 2129