APX809-29SRG-7 Overview

There are 3 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of TO-236-3, SC-59, SOT-23-3 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. There is a specification for the peak reflow temperature of the package to be 260. Surface Mount mounts power management on the wall. Power Management Circuits is a subcategory of this PMIC chip. A total of 3 pins are located on this power management. Power managment ic pin count is 3. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. This range of temperature should be set for the supervisors: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a supply current of 30μA for the power management. It is always advisable to use APX809, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management has 1 monitored inputs.

APX809-29SRG-7 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
30μA operating supply current

APX809-29SRG-7 Applications

There are a lot of Diodes Incorporated APX809-29SRG-7 Voltage Supervisors applications.

Detection of phase loss
Battery cars
Electronics installed in the vehicle
Solar power charger
Power distribution systems of operating room
Efficient information transmission
Battery cars
Radar
Cloud computing
Important electronics for automotive safety

In Stock : 3403