APX823-23W5G-7 Overview

There are 5 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. IC management is packaged as a SC-74A, SOT-753 package. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. The package peak reflow temperature is specified to be 260. The power management is mounted by a Surface Mount-axis. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 5 pins on the board. 5 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The supervisor's supply current is specified to 40μA. A similar IC managements number of the manufacturer can always be found by using APX823, the base power ics number. A maximum supply temperature of 40μA can be used with this power management. In total, there are 1 inputs on the power management that can be monitored.

APX823-23W5G-7 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
40μA operating supply current

APX823-23W5G-7 Applications

There are a lot of Diodes Incorporated APX823-23W5G-7 Voltage Supervisors applications.

Fire equipment power monitoring system
Unattended substation automation
Medical-specific insulation monitor
Analog circuit
Radar
Magnetic resonance imaging
Power communication system
Power distribution systems of infant care room
Solar power charger
Utility meter

In Stock : 11781