APX824-23W5G-7 Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. It is packaged with Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. By Surface Mount, IC management has been mounted. This power ic can be sub-categorized as Power Management Circuits. A total of 5 pins are located on this power management. Power managment ic pin count is 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 40μA. A similar IC managements number of the manufacturer can always be found by using APX824, the base power ics number. The maximum supply temperature is 40μA. The power management has 1 monitored inputs.

APX824-23W5G-7 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
40μA operating supply current

APX824-23W5G-7 Applications

There are a lot of Diodes Incorporated APX824-23W5G-7 Voltage Supervisors applications.

Automotive power systems
Important electronics for automotive safety
Household appliances
Radio
Personal computers
Electric heating appliances
Efficient information transmission
Radar
Solar power charger
Satellite navigation

In Stock : 3239