ISL28110FBZ-T7 Overview

Packaging for the buffer amplifier is in the form of a SOIC case. Buffer amps of this type are called OPERATIONAL AMPLIFIER-types. There is a Tape & Reel case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. It has 8 pins that make up the linear amplifier. There is an input offset voltage of 300μV for this buffer op amp. Using a supply current of 2.55mA , this buffer op amp will be able to operate. It is recommended to keep the voltage gain at 108dB at all times. On this instrumentation amplifier, there are 1 circuits that are connected together. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. No temperature greater than 125°C should be used. It is used TAPE AND REEL to pack the op amps. With regard to the supply voltage, this electrical component is capable of working from under 40V. As a general rule, you should conduct this electronic component under dual supply voltages of 20V volts.

ISL28110FBZ-T7 Features

8 Pins
supply voltage of 5V
108dB voltage gain

ISL28110FBZ-T7 Applications

There are a lot of Intersil (Renesas Electronics America) ISL28110FBZ-T7 Instrumentational OP Amps applications.

Proportional counter tubes
Television
Professional videography
Medical instruments
MP3
Tablets
Switching amplifier
Voltage regulation circuit
High input resistance broadband
Band-pass filter

In Stock : 1