MAX483EESA+ Overview

Due to the enhanced 8-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.In the Tube package, this receiver is mounted.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver requires a 4.75V~5.25V power supply.This electronic part can have?up to 1/1 eligible receivers/drivers on the field at once.?As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.With a voltage range of 5V, this driver IC can operate efficiently.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.There are 8 pinouts available on this transceiver which are market standard.Since the base part number MAX483 describes the product type, temperature, package, etc., you might get more options by searching with it.8-pin driver chip with enhanced power dissipation.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.This receiver is typically specified with a resolution of 1 bits. There is a voltage supply of 5V required in order for this transceiver module to be operated.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.This driver IC is designed to operate from a 5V power supply.This IC implements 1 transceivers overall.It is recommended that enough current be supplied to the VCC pin of the ic receiver, but not more than 0.65mA.It is capable of driving LEDs with a voltage of 350μA as the input voltage to this integrating circuit.In addWide receiverion to delivering voltage at 3V, Wide receiver also has the abilWide receivery to measure voltage.

MAX483EESA+ Features

Tube package
8 pin count
8 pins
5V power supply

MAX483EESA+ Applications

There are a lot of Maxim Integrated MAX483EESA+ Drivers/Receivers/Transceivers applications.

Satellite communications networks
Shortwave receiver
Ship
Routers
Remote controls
Ethernet circuitry
TV signal transmission
LAN, SAN, WAN (local, storage, work area networks)
Optical sub-assembly (OSA)
Remote controls

In Stock : 3302