MAX6315US29D2+T Overview

Power management is mounted through 4 terminals. Power management is packaged in a Strip way. In this IC power you will find 1 functions for you to refer to. Power management consists of 1 channels, each of which can be used independently. There are TO-253-4, TO-253AA functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. The supervisor is always powered by a 3.6V volt supply. IC management conducts in a 1-voltage supply. By Surface Mount, IC management has been mounted. In total, IC powers are 4 pins on the board. There are 4 pins on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~125°C TA degrees. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. There is a supply current of 5μA for the power management.

MAX6315US29D2+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
5μA operating supply current

MAX6315US29D2+T Applications

There are a lot of Maxim Integrated MAX6315US29D2+T Voltage Supervisors applications.

Data storage applications
Power distribution systems of ICU
Military electronics
Set top box
Satellite navigation
emergency room
Utility meter
Telecommunications equipment
Battery cars
Electric heating appliances

In Stock : 12490