MAX6338KUB+ Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 10 in total. Tube-packaging is used. Please refer to this PMIC for 1 functions. A series of 4 channels can be found on this supervisor. Please find attached 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions for your reference in this IC power. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 3V. There is a voltage supply of 4 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 10 pins on IC management. The pins of the power management system count 10. There should be a minimum voltage supply (Vsup) of 2.5V for this PMIC. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. The supervisor's supply current is specified to 35μA. A similar IC managements number of the manufacturer can always be found by using MAX6338, the base power ics number. The power management must be powered by 3/5V volts to function properly.

MAX6338KUB+ Features

Multi-Voltage Supervisor type
Minimum supply voltage of 2.5V
35μA operating supply current

MAX6338KUB+ Applications

There are a lot of Maxim Integrated MAX6338KUB+ Voltage Supervisors applications.

DC stabilized power supply module
DVR
Radar
emergency room
Military communications
Satellite navigation
Solar power charger
Military electronics
Leakage current detection
Electronics installed in the vehicle

In Stock : 2