MAX6339MUT+T Overview

It is mounted through 6 terminals on the power management. It is packaged with Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 4 channels. Please refer to power management for SOT-23-6 functions. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 2.5V is applied to the power ic, it conducts. A supply voltage of 4 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 6 pins on power management. 6 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. As far as the supply current of the power management is concerned, it is 55μA. For similar manage ics search of the manufacturer, you can always refer to MAX6339, the base PMIC number.

MAX6339MUT+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
55μA operating supply current

MAX6339MUT+T Applications

There are a lot of Maxim Integrated MAX6339MUT+T Voltage Supervisors applications.

Embedded computing
Satellite navigation
Refrigeration
Precision measurement
Power distribution systems of infant care room
Detection of phase loss
Multi-voltage system
Display equipment
Smartphones
Battery-powered equipment

In Stock : 2500