MAX882CSA+ Overview

A Tube case is used to deliver this IC regulator. Packaging of the Liner regulator IC takes the form of a 8-SOIC (0.154, 3.90mm Width) case. As you can see, the IC chip has 8 terminations. This PMIC chip has an output type of Adjustable (Fixed). This part implements 1 regulator ICs, which can be found in the following table. The Linear Voltage Regulator's mounting type is Surface Mount. 0°C~70°C degrees is the operating temperature of the Voltage Regulator IC. It has been configured that the output function of this IC regulator is Positive. As you can see, the regulator IC has a total of 8 pins. As a result of this IC voltage regulator's 2 outputs, it ensures prompt, adequate performance for all your applications. As far as its dropout voltage is concerned, it is 10 volts. There are 8 pins on the chip. For your information, part number MAX882 is the basic part number for this voltage regulator IC. An example of such a component would be this Other Regulators component. It works in 200mA output current at mostIt operates in the 15μA Quiescent Current state.

MAX882CSA+ Features

320mV dropout voltage
Other Regulators subtageroy

MAX882CSA+ Applications

There are a lot of Maxim Integrated MAX882CSA+ Linear Voltage Regulators applications.

Camera
Sense & Conrol
CAV (Connected and Automated Vehicle)
HMI (Human-Machine Interface)
Gateway module
Engine cooling fan
Portable telephone
Multiple-power supply system
Digital TV
Car eCall

In Stock : 729