MAX884CSA+ Overview

A Tube case is used to deliver the Voltage Regulated IC. Packaging of the Liner regulator IC takes the form of a 8-SOIC (0.154, 3.90mm Width) case. There are 8 terminations on the gadget. Adjustable (Fixed) is the IC Voltage Regulator's output type. A total of 1 regulators are implemented in this eletric component. The range of operating temperatures of Surface Mount are programmable in the Voltage Regulator Chip, so that the temperature can be varied as desired. The IC voltage regulator must be maintained at 0°C~70°C degrees for it to function. There is a Positive configured as the output function for this IC regulator. In terms of its current output, it is able to supply 200mA. The chip consists of a total of 8 pins in total. To ensure prompt, sufficient performance, this part features 2 outputs in total. There is a dropout voltage of 10 volts on this IC regulator. On the chip, there are pins for the 8 axis. For your information, part number MAX884 is the basic part number for this voltage regulator IC. The component shown here is a typical Other Regulators component.

MAX884CSA+ Features

320mV dropout voltage
Other Regulators subtageroy

MAX884CSA+ Applications

There are a lot of Maxim Integrated MAX884CSA+ Linear Voltage Regulators applications.

Laboratory
PLL (Phase-Locked Loop)
CAV (Connected and Automated Vehicle)
Vibration sensor
eBike
Noise filters
Low Noise Instrumentation
Fuel injector
ADAS (Advanced Driver-Assistance System)
Disk drivers

In Stock : 308