MCP101-450DI/TO Overview

As you can see, this power management is mounted through 3 terminals. It is packaged with Bulk. Please find attached 1 functions for your reference in this IC power. This power managment ic consists of 1 channels, each of which can be used independently. IC management is packaged as a TO-226-3, TO-92-3 (TO-226AA) package. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. When 4.25V is applied to the power ic, it conducts. Power ics operate at 1 supply voltages. Using Through Hole, IC management is mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 3. 3 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Through Hole type of mounting. The temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. There is a supply current of 60μA for the power management. To find similar IC managements from the manufacturer, you can always search by MCP101. The maximum supply temperature voltage supervisor can handle is 60μA.

MCP101-450DI/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

MCP101-450DI/TO Applications

There are a lot of Microchip Technology MCP101-450DI/TO Voltage Supervisors applications.

Radar
Fire equipment power monitoring system
FPGA design
Medical-specific insulation monitor
Microcontroller system
Sensitive sensors
Military communications
DSP
Stable power system
Unattended substation automation

In Stock : 15