NB3W800LMNTXG Overview

The Tape & Reel (TR) method is used for packaging clock ICs. Clock PLL is embedded in the 48-VFQFN Exposed Pad package. The peak reflow temperature (Cel) amounts to NOT SPECIFIED to be essentially indestructible. There are 48 terminations found in this file. This time clock generator should be voltaged at 3.3V. In this case, Clock is designed to be the input of the clock generator. It is possible to access the full performance of the electrical part by implementing 1 circuits. RF synthesizers based on this clock provide frequencies up to 133.33MHz maximum. PLL clock is mounted in the way of Surface Mount. Approximately 3.465V is the maximum supply voltage needed by this time clock generator. In terms of supply voltage, RF synthesizer works with 3.135V~3.465V. Using the test statistics, we estimate that the ambient temperature should be 0°C~70°C. HCSL logic levels are supported by this RF synthesizer. There is a low timing skew at 0.05 nsmax with this RF synthesizer. NB3-family clock generators are similar.

NB3W800LMNTXG Features

Available in the 48-VFQFN Exposed Pad
Supply voltage of 3.3V

NB3W800LMNTXG Applications

There are a lot of ON Semiconductor NB3W800LMNTXG Clock Generators applications.

Cell phones
Automatic test equipment
CPUs
FMCW Radar
Skew suppression
Integrated phase noise in aerospace systems
Remote telemetry and instrumentation
Microwave radio
Microwave backhaul IF
Main oscillator in receiver

In Stock : 43