LD49150PT10R Overview

Tape & Reel (TR) cases are used for delivery. Packaged in a TO-252-5, DPak (4 Leads + Tab), TO-252AD case, the battery regulator IC is protected from damage during shipment. There are 4 terminations on the battery regulator IC chip and each of them has its own function. Fixed is the Voltage Regulator Chip's output type. In this electrical part, there are 1 regulators that are implemented. As a result of the Linear Voltage Regulator's design, the operating temperature of Surface Mount can be adjusted within a specified range. Keeping the temperature at -25°C~125°C degrees is necessary for this regulator to function. It is configured for output function Positive on this regulator. In total, this chip consists of 3 pins and is divided into two groups. In order to ensure prompt, adequate, and prompt performance, this regulator has 1 outputs in total. Its dropout voltage is 10 volts. A 5-pin is present on the chip. FYI, the basic part number for this IC regulator is LD49150. I would describe this component as a typical Other Regulators component. There is a way of packing the regulator that is called TAPE AND REEL. Taking into account the operation requirements, the maximum output current of the IC voltage regulator reaches 1.5A.

LD49150PT10R Features

1.5V dropout voltage
Other Regulators subtageroy
TAPE AND REEL method of packing

LD49150PT10R Applications

There are a lot of STMicroelectronics LD49150PT10R Linear Voltage Regulators applications.

Electronic notebook
TVS diodes
Clock power supplies
Motorcycle
LCD backlight
Peripheral devices
Decoupling circuit
Disk drivers
Solar inverters
Game machines

In Stock : 16