LK112M25TR Overview

A Tape & Reel (TR) case is used to deliver the Voltage Regulated IC. The package is in a SC-74A, SOT-753 case. As you can see, the IC chip has 5 terminations. Output type Fixed. In this electrical part, there are 1 regulators that are implemented. The Linear Voltage Regulator's mounting type is Surface Mount. Keeping the temperature at -30°C~125°C degrees is necessary for this regulator to function. There is one output function configured for this voltage regulator IC, and that is Positive. There are a total of 5 pins on this board. The part includes 1 outputs in order to ensure that the voltage regulator IC performs effectively and in a timely manner. In terms of its dropout voltage, it is 10 volts. The component's pin number remains 5. As an FYI, this IC voltage regulator has the basic part number LK112. An example of such a component would be this Other Regulators component. In order to pack the regulator, the method is TAPE AND REEL. Upon reaching its maximal output current, 150mA, it is able to satisfy the operation requirements. It operates in the 250μA Quiescent Current state.

LK112M25TR Features

290mV dropout voltage
Other Regulators subtageroy
TAPE AND REEL method of packing

LK112M25TR Applications

There are a lot of STMicroelectronics LK112M25TR Linear Voltage Regulators applications.

DVD and CD-ROM drive
Disk drivers
HVAC (Heating, Ventilation, and Air Conditioning)
Hot swap controller
Blower
Ultrasound
Battery-powered device
Voltage tracker protection circuits
Smart buildings
UPS (Uninterruptible Power Supply )

In Stock : 85793