ADS1113IRUGT Overview

The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 10-XFQFN package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 10 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3.3V.The A/D converter has 1 channels.The is equipped with 10 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~125°C.The number of samples of audio recorded every second is 860 Hz.The input type of this electronic AD converter is Differential, Single Ended.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 10 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADS1113 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Single can be used to categorize supply types.The supply/digital voltage of this electrical AD converter is 2V~5.5V.The ADC converter operates with the maximal supply voltage of 5.5V.1, 2 inputs are employed.It operates with the minimal supply voltage of 2V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 3.3V.The maximal analog input voltage of this electrical AD converter is 4.096V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 900μW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 500μW.The conversion rate of this electrical AD converter is calculated as 860 sps.The minimal analog input voltage of this electrical AD converter is -4.096V.There are 1 converters, which will convert numbers to words and figures to words. Selectable Address can be ensured when operating.The digital converter operates with the minimal supply voltage (DC) of 2V.The ADC converter operates with the maximal supply voltage (DC) of 5.5V.

ADS1113IRUGT Features

1 Functions
10 basic kinds of terminations
10 pin count
Minimal supply voltage of 2V
Maximal supply voltage (DC) of 5.5V

ADS1113IRUGT Applications

There are a lot of Texas Instruments ADS1113IRUGT ADC applications.

Micro and pico cell systems, software radios
Displaying
Broadband data applications
Medical Imaging
Smart antenna systems
Cell Phones
Digital Multimeters, PLC's (Programming Logic Controllers)
RADAR processing, digital oscilloscopes
Rotary encoder
Imaging Systems

In Stock : 34691