Call us: +86 0755-82563503

Currency: $ US Dollar

Items : %s%s

  • DG9432DS-T1-E3

DG9432DS-T1-E3

advertisement

Manufacturer No:

DG9432DS-T1-E3

Manufacturer:

Vishay Siliconix

HK JDW NO:

880-DG9432DS-T1-E3

Package:

SOT-23-8

Datasheet:

DG9432DS-T1-E3

Description:

35ns, 18ns SPST - NC 30Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG9432 8 Pins 1nA 3V SOT-23-8

Quantity:

In Stock : 999

Share

Please send RFQ, we will respond immediately.

* Contact Name

* Business Email

* Company Name

* Country

* Quantity

Product Details

Purchasing and Inquiry

DG9432DS-T1-E3 Overview


Shipping overseas is convenient with the electronic component packed in SOT-23-8. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. The total number of terminations is 8. The electronic part provides high-quality output because it has 1 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. The electrical component body receives 8 pins. Circuits based on SPST - NC switching are used to construct these analog switch ics. Try searching for the analog switch ic with DG9432 if you are looking for variants. In this multiplexer, the internal resistance is 60Ohm. To find out what the 8 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. It is normally recommended that users do not supply the multiplexer with voltages higher than 12V. The analog switch ic is of the Single supply type and is cost-effective. A low voltage of 2.7V should be applied to the electronic component. An operating current of 1μA would be sufficient for this switch device. The voltage required by this switch device is 2.7V~12V, draining from a single voltage supply. When the digital multiplexer is charged above -1μA, damage can occur. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. In order to operate the 2 inputs, there are several steps to follow.

DG9432DS-T1-E3 Features


1 Channels
Switch Circuit: SPST - NC
1μA Supply Current

DG9432DS-T1-E3 Applications


There are a lot of Vishay Siliconix DG9432DS-T1-E3 Analog Switches & Multiplexers ICs applications.

  • SONET/SDH ADM
  • Medical Instrumentation
  • Automotive applications
  • Digital access cross connects
  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
  • Cell phones
  • Voice over IP/DSL – Integrated Access Devices, Smart
  • Power routing
  • Mechanical reed relay replacement
  • Battery-powered systems
1. Purchase

You can send an inquiry by email, or add the item to the RFQ list and submit it to us.
Tell us the model and quantity you need, our sales staff will reply the price in time.
EmailEmail for receiving inquiries: jindawei@hkjdwchip.com

2. Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

3. RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

4. Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.

Purchasing and Inquiry

Payment Method

The fee is charged according to the rule of PayPal.
East West Bank charge US$30.00 banking fee.
The fee is charged according to the rule of PayPal.
Western Union charge US$0.00 banking fee.

Shipping

DHL(www.dhl.com)
From $40.00 basic shipping fee depend on zone and country.
UPS(www.ups.com)
From $40.00 basic shipping fee depend on zone and country.
FedEx(www.fedex.com)
From $40.00 basic shipping fee depend on zone and country.
Registered Mail(www.singpost.com)
From $10.00 basic shipping fee depend on different zone and country.

Package

Product
Step1Product
Casing drivepipe
Step2Casing drivepipe
Anti-static bag
Step3Anti-static bag
Packaging boxes
Step4Packaging boxes
Bar-code shipping tag
Step5Bar-code shipping tag

DG9432DS-T1-E3

technical specifications, attributes, parameters and parts with similar specifications to DG9432DS-T1-E3.

  • Type
    Parameter
    Select All
  • Terminal Position

    DUAL

  • Terminal Form

    GULL WING

  • Peak Reflow Temperature (Cel)

    260

  • Number of Functions

    2

  • Supply Voltage

    3V

  • Terminal Pitch

    0.65mm

  • Reach Compliance Code

    unknown

  • Time@Peak Reflow Temperature-Max (s)

    10

  • Base Part Number

    DG9432

  • Output

    SEPARATE OUTPUT

  • Pin Count

    8

  • Qualification Status

    Not Qualified

  • Number of Channels

    1

  • Max Supply Voltage

    12V

  • Min Supply Voltage

    2.7V

  • Operating Supply Current

    1μA

  • Power Dissipation

    515mW

  • Max Supply Current

    -1μA

  • Throw Configuration

    SPST

  • Turn On Delay Time

    35 ns

  • Number of Inputs

    2

  • Supply Type

    Single

  • Turn-Off Delay Time

    18 ns

  • On-State Resistance (Max)

    30Ohm

  • Multiplexer/Demultiplexer Circuit

    1:1

  • Off-state Isolation-Nom

    77 dB

  • Current - Leakage (IS(off)) (Max)

    1nA

  • Channel Capacitance (CS(off), CD(off))

    7.5pF 7.8pF

  • On-state Resistance Match-Nom

    0.4Ohm

  • Switch Circuit

    SPST - NC

  • Switch Time (Ton, Toff) (Max)

    35ns, 18ns

  • Charge Injection

    0.36pC

  • Channel-to-Channel Matching (ΔRon)

    300m Ω

  • Crosstalk

    -96dB @ 1MHz

  • Switching

    BREAK-BEFORE-MAKE

  • Switch-on Time-Max

    100ns

  • Voltage - Supply, Single (V+)

    2.7V~12V

  • Height

    1.2mm

  • Length

    2.9mm

  • Width

    1.65mm

  • RoHS Status

    ROHS3 Compliant

  • Mount

    Surface Mount

  • Mounting Type

    Surface Mount

  • Package / Case

    SOT-23-8

  • Number of Pins

    8

  • Weight

    40.001177mg

  • Operating Temperature

    -40°C~85°C TA

  • Packaging

    Tape & Reel (TR)

  • Published

    2013

  • JESD-609 Code

    e3

  • Pbfree Code

    yes

  • Part Status

    Obsolete

  • Moisture Sensitivity Level (MSL)

    1 (Unlimited)

  • Number of Terminations

    8

  • Resistance

    60Ohm

  • Terminal Finish

    Matte Tin (Sn)

  • Subcategory

    Multiplexer or Switches

  • Max Power Dissipation

    515mW

  • Technology

    CMOS

Hot Sales in Thermal

HI1-5049-5

HI1-5049-5

HI1-5049-5

DG409DY-T1-E3

DG409DY-T1-E3

DG409DY-T1-E3

DG2531DQ-T1-E3

DG2531DQ-T1-E3

DG2531DQ-T1-E3

DG442LDY-T1-E3

DG442LDY-T1-E3

DG442LDY-T1-E3

SN74LVC1G66DRLRG4

SN74LVC1G66DRLRG4

SN74LVC1G66DRLRG4

DG411DYZ-T

DG411DYZ-T

DG411DYZ-T

DG4053EEY-T1-GE3

DG4053EEY-T1-GE3

DG4053EEY-T1-GE3

MAX14526EEWP+TCJ8

MAX14526EEWP+TCJ8

MAX14526EEWP+TCJ8

ISL43112IB

ISL43112IB

ISL43112IB

MAX4659EUA+T

MAX4659EUA+T

MAX4659EUA+T

Parts with Similar Specs

The three parts on the right have similar specifications to Aavid.

  • Image
    Part Name
    Manufacturer
    HK JDW NO
    Package
    Stock
    DataSheet:
    Compare:
  • FSA266K8X
    ON Semiconductor
    598-FSA266K8X
    8-VFSOP (0.091, 2.30mm Width)
    2-3 Days
    Add Compare
  • NC7WB66K8X
    ON Semiconductor
    598-NC7WB66K8X
    8-VFSOP (0.091, 2.30mm Width)
    2-3 Days
    Add Compare
  • NC7SB3157P6X
    ON Semiconductor
    598-NC7SB3157P6X
    6-TSSOP, SC-88, SOT-363
    2-3 Days
    Add Compare
  • FSA4157P6X
    ON Semiconductor
    598-FSA4157P6X
    6-TSSOP, SC-88, SOT-363
    2-3 Days
    Add Compare
  • FSA3157L6X
    ON Semiconductor
    598-FSA3157L6X
    6-UFDFN
    2-3 Days
    Add Compare
  • FSA1157P6X
    ON Semiconductor
    598-FSA1157P6X
    6-TSSOP, SC-88, SOT-363
    2-3 Days
    Add Compare
  • DG413DY-E3
    Vishay Siliconix
    880-DG413DY-E3
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • FSA1256L8X
    ON Semiconductor
    598-FSA1256L8X
    8-UFQFN
    2-3 Days
    Add Compare
  • FSA1256AL8X
    ON Semiconductor
    598-FSA1256AL8X
    8-UFQFN
    2-3 Days
    Add Compare
  • DG408DJ
    Vishay Siliconix
    880-DG408DJ
    16-DIP (0.300, 7.62mm)
    2-3 Days
    Add Compare
  • DG442DY
    Vishay Siliconix
    880-DG442DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG445DY
    Vishay Siliconix
    880-DG445DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG271BDY
    Vishay Siliconix
    880-DG271BDY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG408LDY
    Vishay Siliconix
    880-DG408LDY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG406DN
    Vishay Siliconix
    880-DG406DN
    28-LCC (J-Lead)
    2-3 Days
    Add Compare
  • FSA4157L6X
    ON Semiconductor
    598-FSA4157L6X
    6-UFDFN
    2-3 Days
    Add Compare
  • DG428DN
    Vishay Siliconix
    880-DG428DN
    20-LCC (J-Lead)
    2-3 Days
    Add Compare
  • DG613DY
    Vishay Siliconix
    880-DG613DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG642DY
    Vishay Siliconix
    880-DG642DY
    8-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG411DY-T1
    Vishay Siliconix
    880-DG411DY-T1
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
index:  0 - 9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z
Settings Need Help?
Top FAQ's

How can I quickly find answers to my questions?

Please visit the Help & Support area of our website to find information regarding ordering, shipping, delivery and more.

What is my Order Status?

Registered users can track orders from their account dropdown, or click here. *Order Status may take 12 hours to update after initial order is placed.

How do I return product?

Users can begin the returns process by starting with our Returns Page.

How do I find price and availability?

Quotes can be created by registered users in myLists.

How do I create a 'HK JDW' Account?

Visit the Registration Page and enter the required information. You will receive an email confirmation when your registration is complete.

United Kingdom/GBP Summary
Fast Shipping Fast Delivery

Orders are typically delivered to United Kingdom within 48 hours depending on location.

Free Shipping Free Shipping

Free delivery to United Kingdom on orders of £33 or more. A delivery charge of £12 will be billed on all orders less than £33.

Incoterms Incoterms

DDP (Duty and customs paid by HK JDW)

Payment Options Payment Types

Credit account for qualified institutions and businesses

Payment in Advance by Wire Transfer

Visa Mastercard American Express PayPal Apple Pay Google Pay

Marketplace Marketplace Product

More Products From Fully Authorized Partners

Average Time to Ship 1-3 Days, extra ship charges may apply. Please see product page, cart, and checkout for actual ship speed.

Incoterms: CPT (Duty, customs, and applicable VAT/Tax due at time of delivery)

For more information visit Help & Support