Items : %s%s
DS1232LPS-2
DS1232LPS-2
503-DS1232LPS-2
8-SOIC (0.154, 3.90mm Width)
5V8 Terminals 8-Pin DS1232LP Voltage supervisorMicroMonitor? Series 1 Channels Min 4.5V Max 5.5V
In Stock : 999
Share
Please send RFQ, we will respond immediately.
Product Details
Purchasing and Inquiry
DS1232LPS-2 Overview
There are 8 terminals on this power management that allow it to be mounted. There is a Tube-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels available on this supervisor, and each channel has a different function. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 245. The supervisor is always powered by a 5V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by a Surface Mount-axis. The power management system can be categorized as a Power Management Circuits chip. There are a total of 8 pins on power management. 8 pins are present on the power management system. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 4.5V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type for IC management is Surface Mount. You should set the supervisor's temperature during 0°C~70°C TA . While in operation, this supervisor has a voltage output of Open Drain, Push-Pull. There is a 200μA supply current present in the power management. The other features include, for example, [0], which is just one example. It is always advisable to use DS1232LP, the base supervisor number, when searching for similar PMICs from the manufacturer. The voltage supervisor requires a power source of 5V volts in order to work correctly. A maximum supply temperature of 200μA can be used. The IC power comes from the well-known MicroMonitor? series.
DS1232LPS-2 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
200μA operating supply current
DS1232LPS-2 Applications
There are a lot of Maxim Integrated DS1232LPS-2 Voltage Supervisors applications.
- Electronics installed in the vehicle
- Unattended substation automation
- Electrical fire monitoring system
- DVR
- Magnetic resonance imaging
- DC stabilized power supply module
- Radar
- Dash board
- Rechargeable batteries
- Microprocessor system
You can send an inquiry by email, or add the item to the RFQ list and submit it to us.
Tell us the model and quantity you need, our sales staff will reply the price in time.
Email for receiving inquiries: jindawei@hkjdwchip.com
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
3. RFQ (Request for Quotations)It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.
1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.
Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
Payment Method
| The fee is charged according to the rule of PayPal. | |
| East West Bank charge US$30.00 banking fee. | |
| The fee is charged according to the rule of PayPal. | |
| Western Union charge US$0.00 banking fee. |
Shipping
| DHL(www.dhl.com) From $40.00 basic shipping fee depend on zone and country. |
|
| UPS(www.ups.com) From $40.00 basic shipping fee depend on zone and country. |
|
| FedEx(www.fedex.com) From $40.00 basic shipping fee depend on zone and country. |
|
| Registered Mail(www.singpost.com) From $10.00 basic shipping fee depend on different zone and country. |
Package
 |
 |
 |
 |
 |
DS1232LPS-2
technical specifications, attributes, parameters and parts with similar specifications to DS1232LPS-2.
Hot Sales in Thermal
.png)
Parts with Similar Specs
The three parts on the right have similar specifications to Aavid.
-
ImagePart NameManufacturerHK JDW NOPackageStockDataSheet:Compare:
-
Maxim Integrated503-MAX6373KA+TSOT-23-82-3 DaysAdd Compare -
Maxim Integrated503-MAX6369KA+TSOT-23-82-3 DaysAdd Compare
-
Maxim Integrated503-MAX16004ATP+20-WFQFN Exposed Pad2-3 DaysAdd Compare -
Maxim Integrated503-MAX16004ETP+20-WFQFN Exposed Pad2-3 DaysAdd Compare
-
Maxim Integrated503-MAX809JEUR+TTO-236-3, SC-59, SOT-23-32-3 DaysAdd Compare -
Maxim Integrated503-MAX809SEUR+TTO-236-3, SC-59, SOT-23-32-3 DaysAdd Compare
-
Maxim Integrated503-MAX16004DTP+-2-3 DaysAdd Compare
-
Maxim Integrated503-MAX16005DTE+16-WQFN Exposed Pad2-3 DaysAdd Compare -
Maxim Integrated503-MAX6316LUK29CY+TSC-74A, SOT-7532-3 DaysAdd Compare -
Maxim Integrated503-MAX16001ETE+16-WQFN Exposed Pad2-3 DaysAdd Compare
Need Help?
