Items : %s%s
DG417BDJ-E3
DG417BDJ-E3
880-DG417BDJ-E3
8-DIP (0.300, 7.62mm)
89ns, 80ns SPST - NC 25Ohm Analog Switches BREAK-BEFORE-MAKE DG417 8 Pins 250pA 15V 8-DIP (0.300, 7.62mm)
In Stock : 999
Share
Please send RFQ, we will respond immediately.
Product Details
Purchasing and Inquiry
DG417BDJ-E3 Overview
Shipping overseas is convenient with the electronic component packed in 8-DIP (0.300, 7.62mm). A high level of reliability can be achieved through the use of an advanced packaging method Tube. Multiplexers like this are mounted in the Through Hole position. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around -40°C~85°C TA. 8 terminations have been made so far. A 1 channel electronic part produces high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. There are 8 pins injected into the electronic part body. A SPST - NC switching circuit is used to build these analog multiplexers. The circuits in this analogue multiplexer number 1. Try searching for the analog switch ic with DG417 if you are looking for variants. This digital multiplexer has 35Ohm internal resistance. To find out what the 8 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. A voltage higher than 36V should not normally be supplied to the switches. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 13V is the lowest voltage that should be fed to the electronic electronic part. For this multiplexer to operate, 1μA current would be sufficient. Putting voltage greater than 1μA on the multiplexer may cause damage. Despite this switch device's dual supply capability, its voltage should not exceed 22V. The voltage should be at least 7V if you are using dual power supplies. 20V operating voltages can be used with this electrical part.
DG417BDJ-E3 Features
1 Channels
Switch Circuit: SPST - NC
1μA Supply Current
DG417BDJ-E3 Applications
There are a lot of Vishay Siliconix DG417BDJ-E3 Analog Switches & Multiplexers ICs applications.
- PCMCIA cards
- Avionics
- Intelligent PBX
- Sample-and-hold systems
- Switching Systems
- RGB switches
- Industrial
- ISDN NT1/TA
- Microwave transmission systems
- Avionics and Military Systems
You can send an inquiry by email, or add the item to the RFQ list and submit it to us.
Tell us the model and quantity you need, our sales staff will reply the price in time.
Email for receiving inquiries: jindawei@hkjdwchip.com
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
3. RFQ (Request for Quotations)It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.
1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.
Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
Payment Method
| The fee is charged according to the rule of PayPal. | |
| East West Bank charge US$30.00 banking fee. | |
| The fee is charged according to the rule of PayPal. | |
| Western Union charge US$0.00 banking fee. |
Shipping
| DHL(www.dhl.com) From $40.00 basic shipping fee depend on zone and country. |
|
| UPS(www.ups.com) From $40.00 basic shipping fee depend on zone and country. |
|
| FedEx(www.fedex.com) From $40.00 basic shipping fee depend on zone and country. |
|
| Registered Mail(www.singpost.com) From $10.00 basic shipping fee depend on different zone and country. |
Package
 |
 |
 |
 |
 |
DG417BDJ-E3
technical specifications, attributes, parameters and parts with similar specifications to DG417BDJ-E3.
Hot Sales in Thermal
Parts with Similar Specs
The three parts on the right have similar specifications to Aavid.
-
ImagePart NameManufacturerHK JDW NOPackageStockDataSheet:Compare:
-
ON Semiconductor598-FSA266K8X8-VFSOP (0.091, 2.30mm Width)2-3 DaysAdd Compare -
ON Semiconductor598-NC7WB66K8X8-VFSOP (0.091, 2.30mm Width)2-3 DaysAdd Compare
-
ON Semiconductor598-NC7SB3157P6X6-TSSOP, SC-88, SOT-3632-3 DaysAdd Compare -
ON Semiconductor598-FSA4157P6X6-TSSOP, SC-88, SOT-3632-3 DaysAdd Compare
-
ON Semiconductor598-FSA3157L6X6-UFDFN2-3 DaysAdd Compare -
ON Semiconductor598-FSA1157P6X6-TSSOP, SC-88, SOT-3632-3 DaysAdd Compare
-
Vishay Siliconix880-DG413DY-E316-SOIC (0.154, 3.90mm Width)2-3 DaysAdd Compare -
ON Semiconductor598-FSA1256L8X8-UFQFN2-3 DaysAdd Compare -
ON Semiconductor598-FSA1256AL8X8-UFQFN2-3 DaysAdd Compare
-
Vishay Siliconix880-DG408DJ16-DIP (0.300, 7.62mm)2-3 DaysAdd Compare -
Vishay Siliconix880-DG442DY16-SOIC (0.154, 3.90mm Width)2-3 DaysAdd Compare
-
Vishay Siliconix880-DG445DY16-SOIC (0.154, 3.90mm Width)2-3 DaysAdd Compare
-
Vishay Siliconix880-DG271BDY16-SOIC (0.154, 3.90mm Width)2-3 DaysAdd Compare
-
Vishay Siliconix880-DG408LDY16-SOIC (0.154, 3.90mm Width)2-3 DaysAdd Compare
-
Vishay Siliconix880-DG406DN28-LCC (J-Lead)2-3 DaysAdd Compare -
ON Semiconductor598-FSA4157L6X6-UFDFN2-3 DaysAdd Compare
-
Vishay Siliconix880-DG428DN20-LCC (J-Lead)2-3 DaysAdd Compare -
Vishay Siliconix880-DG613DY16-SOIC (0.154, 3.90mm Width)2-3 DaysAdd Compare
-
Vishay Siliconix880-DG642DY8-SOIC (0.154, 3.90mm Width)2-3 DaysAdd Compare -
Vishay Siliconix880-DG411DY-T116-SOIC (0.154, 3.90mm Width)2-3 DaysAdd Compare
Need Help?
